Overview
- CUTTING LENGTH - 1 – 3.5mm
- COMPATIBLE WITH - For all Wahl adjustable blade clippers
- HOW TO OIL - Place 3 drops of oil along the top and sides of blades. Turn the cliper on to allow the oil to run through the blades. Remove excess with a cloth
- CHANGING BLADES - Push taper lever all the way towards the lid. Position small moving blade over the clipper drive finger. Set large stationary blade on small moving blade and artially tighten the screws
- ALIGNING BLADES - Move stationary bade into alignent, making sure the ends of the moving teeth are .025 to .050 back from the stationary balde. Tighten the screws.
Description
This 2 hole screw on blade set is used on most professional clippers with a taper arm.
It offers good all round barbering.
When this blade set is used on the cordless super taper it is secured with T20 Torx screws.
Blades can be sharpened.
Replacement blade for Pro Clip, Super Taper, Taper 2000, Academy Mains Clipper, Cordless Super Taper and Icon.
Suitable for all round barbering.
Directions for Use
Full instructions provided in pack.
Delivery & Stock
Read the reviews
Recently Viewed Products
Offer
£10.62
£17.70
SALE - SAVE 40%
<ul><li>Tone-on-Tone colouring in gel cream with a neutral pH</li><li>Restores level and tone in cosmetically treated hair, increasing the duration and level of shine of the results</li><li>Fragrance Free, Paraben Free, Sles/Sls free, Silicone Free. Contains yoghurt extract</li><li>Up to 84% of ingredients from natural origins *</li><li>Contains Velian Complex</li></ul>
Offer
Exclusive
£10.37
£17.29
SALE - SAVE 40%
<ul><li>Permanent yoghurt based hair color with no ammonia or fragrance</li><li>Delivers perfect coverage of grey hair and intense, brilliant colour results</li><li>Creamy texture</li><li>Up to 70% of ingredients from natural origins *</li><li>Contains Velian Complex</li></ul>
£21.29
<ul>
<li>CUTTING LENGTH - 1 – 3.5mm</li>
<li>COMPATIBLE WITH - For all Wahl adjustable blade clippers</li>
<li>HOW TO OIL - Place 3 drops of oil along the top and sides of blades. Turn the cliper on to allow the oil to run through the blades. Remove excess with a cloth</li>
<li>CHANGING BLADES - Push taper lever all the way towards the lid. Position small moving blade over the clipper drive finger. Set large stationary blade on small moving blade and artially tighten the screws</li>
<li>ALIGNING BLADES - Move stationary bade into alignent, making sure the ends of the moving teeth are .025 to .050 back from the stationary balde. Tighten the screws.</li>
</ul>